• Copying or printing the following items is generally prohibited by local law: bank notes, revenue
stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
• The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing
certain items, consult with your legal advisor.
• This machine is equipped with a function that prevents making counterfeit bank bills. Due to this function
the original images similar to bank bills may not be copied properly.
• Some illustrations in this manual might be slightly different from the machine.
• For good print quality, the supplier recommends that you use genuine print cartridges from the supplier.
• The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from the supplier with your office products.
Power Source
• 220-240 V or more, 50 / 60 Hz, A or more
• Voltage must not fluctuate more than 10%.
• Please be sure to connect the power cable to a power source as above.
• Confirm that the wall outlet is near the machine and freely accessible, so that in event of an emergency,
it can be un-plugged easily.
• Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes
frayed or otherwise damaged.
• The supplied power cord is for use with this equipment only. Do not use with other appliances. Doing
so may result in fire, electric shock, or injury.
• Connect the machine only to the power source described on the inside front cover of this manual.
Connect the power cord directly into a wall outlet and do not use an extension cord.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power cord. Do not place heavy objects on
it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or
fire.
• Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur.
• To avoid hazardous electric shock, do not remove any covers or screws other than those specified in
this manual. When the machine needs to be checked, adjusted, or repaired, contact your service
representative.
• Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock,
explosion or loss of sight. If by any chance this machine falls over or a breakage occurs (e.g. the
cover), turn off the main switch, unplug the power cable and contact your service representative. If
you continue to use the machine in this state it could result in fire or electric shock.
7
Summary of Contents for J012
