• If metal, liquid or foreign matter falls into the machine, turn off the operation and main power switches,
and unplug the main power cord. Contact your service representative. Do not keep using the machine
with a fault or defect.
• If the power cord is damaged (exposure of the core, disconnection, etc.), contact your service
representative to change to a new one. Operating the machine with a damaged power cord may
cause an electric shock or fire.
• Do not put any metal objects or containers holding water (e.g. vases, flowerpots, glasses) on the
machine. If the contents fall inside the machine, a fire or electric shock could occur.
• Keep the machine away from flammable liquids, gases, and aerosols. A fire or an electric shock might
occur.
• Disposal can take place at our authorized dealer.
• Dispose of used ink containers in accordance with local regulations.
• The wall outlet shall be installed near the machine and shall be easily accessible.
• Protect the machine from dampness or wet weather, such as rain and snow.
• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.
• If you use the machine in a confined space, make sure there is a continuous air turnover.
• Unplug the power cord from the wall outlet before you move the machine. While moving the machine,
you should take care that the power cord will not be damaged under the machine.
• Before moving the machine, be sure to disconnect all external connections, especially the power cord
from the wall outlet. Damaged power cords are a fire and electric shock hazard.
• When the machine will not be used for a long time, unplug the power code.
• When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
• Our products are engineered to meet high standards of quality and functionality, and we recommend
that you use only the expendable supplies available at an authorized dealer.
• Deliver to waste product collection areas. Do not dispose of via domestic refuse collection.
• The Toscana-C1a weighs approximately 20 kg (44 lb.), the Toscana-C1b 23 kg (50.7 lb.), and the
Tocana-C1bN 23.5 kg (51.8 lb.)
• When moving the machine, use the indented sections on the side's lower edge, and lift slowly.
• During operation, rollers for transporting the paper and originals revolve. A safety device is being
installed so that the machine can be operated safely. But take care not to touch the machine during
operation. An injury might occur.
• When the optional paper tray unit is installed, do not push the upper part of the main unit horizontally.
An injury might occur if the paper tray unit becomes detached from the main unit.
8
Summary of Contents for J012
