Davin J012, Service Manual

Page: 80 / 365

• Always work carefully around the machine with the scanner unit in the full upright position to avoid
hitting it and knocking it down onto the exposure glass.
Reinstallation
• Position both hinges on the left and right before you reattach the screws.
• Fasten one screw on the left hinge and one screw on the right hinge to make sure both hinges are
aligned, then reattach the other screws.
Paper Cassette, Output Tray
Here are some important points about cover removals:
• The scanner unit must be raised to the full upright position to remove the left and right covers.
• The scanner unit must be removed in order to remove the rear cover.
• The right inner cover does not need to be removed in order to remove the scanner unit.
• The tabs of the covers are fragile. Work carefully to avoid breaking the tabs during cover removal
and reinstallation.
1. Raise the output tray [1].
2. Pull the paper cassette [2] out partially, raise it slightly, then pull it out of the machine.
3. Lower the paper output tray.
4. Use the middle fingers of both hands to press the output tray arms [3] and [4] inward to release them,
then pull the output tray out of the machine.
Common Procedures
79
3