Davin J012, Service Manual

Page: 194 / 365

Item Path
Ink Collection Counter
Replacement Required? 1. [Menu]>"System Settings?"
2. [
 ] or [  ] > "Engine Settings"> [Yes]> "1. Paper Tray Prty?"
3. [  ] or [  ] > "7. Replace InkCollct?"> [Yes]> "Unit Replacement
Is Not Required"
Move CCD to HP 1. [Menu]> [#]> [*]> [Yes]> "1. SERVICE'S CHOICE"
2. [
 ] or [  ] > "6. FUNCTION"> [Yes]> "ADF FEED TEST"
3. [

] or [

] > "CCD MOVE TO HOME"> "[Yes]>
"HOME=START RET=STOP
4. [Start] to move the CCD to the HP if it is out of position
5. [Clear/Stop] to move the CCD to the start position and then
back to the home position.
Move Print Heads (Carriage) to
the Left 1. [Menu]> "System Settings"
2. [

] or [

] > "Maintenance"> [Yes]> "1 Nozzle Check?"
3. [  ] or [  ] > "9 Move Prnt Heads?"> [Yes]. The carriage and
print heads move to the left.
Network Settings This item does not appear in the "System Settings" until after the NIC
has been installed.
1. [Menu]> "System Settings?"
2. [

] or [

] > "Network Settings" > [Yes].
Nozzle Check 1. [Menu]> "System Settings"
2. [

] or [

] > "Maintenance" > [Yes]> "1 Nozzle Check?"
3. [Yes]> "*Please Wait* displays as the pattern prints
Paper Type & Size
• Tray 1
• Tray 2
• Bypass
Note:
• This is be done for Tray 1, Tray 2, and Bypass (Multi Bypass
Tray).
• Tray 2 and the Multi Bypass Tray are options. The selections for
"Tray2" and "Bypass" are not available until the option has been
attached to the machine.
1. [Menu]> "System Settings?"
2. [
 ] or [  ] > "Tray Paper Setting?"> [Yes]> "Tray1?"
([

] or [

] > To select "Tray2" or "Bypass" if either option has
been installed.)
Quick Reference
193
4