Davin J012, Service Manual

Page: 148 / 365

Menu/Menu Item Function
On/Off/Immediate. Default: Off
Off: The job does not print if the specified paper size/type is not
loaded in the tray. The job will execute once the specified paper size/
type is loaded.
On: The job prints even if the specified paper size/type is not loaded
in the tray.
5 Sub Paper Size? Determines whether to print on A4 paper if LT size paper is specified
in the printer driver, or on LT if A4 is specified
Auto/Off. Default: Off.
6 Uni-directn Prnt? Specifies unidirectional or bi-directional printing. Unidirectional
printer is better quality but bi-directional printing is faster.
• Env. Selector On?. The direction of printing (uni- or bi-
directional) is determined by the setting of the envelope selector.
When the selector is set to the rear, printing is uni-directional for
envelopes and when set forward printing is uni-directional or bi-
directional depending on the paper type.
• Auto Detect Ppr/Mode?. Printing is uni-directional or bi-
directional depending on the paper type. This position of the
envelope selector is ignored.
• Always Uni-dir?. Printing is always uni-directional regardless of
the envelope selector position and paper type.
Default: Env. Selector On
7 Replace InkCollct? Resets the counter for the ink collector unit after the old unit is replaced
with a new one.
Note: If this item is executed and the ink collector unit does not require
replacement, then this message appears: "Unit replacement is not
required. Press Yes Key".
Host I/F Settings?
1 I/O Timeout? Determines how long the machine waits for the interface to respond.
After the specified time elapses, the machine can receive data from
another interface. If the specified time is too short, a timeout might
occur while a data transfer is in progress. If this occurs, the print job
will be interrupted by a new job from another interface.
Range: 10, 15, 20, 25, 60 sec.
Default: 15 sec.
Display Summary
147
4