![background image](http://html1.mh-extra.com/html/canon/bjc-s520/bjc-s520_setup-instructions_4184473001.webp)
Install the Ink Tanks
Unpack the Printer
1
2
3
4
5
Prepare the Printer
Install the Printhead
Color Bubble Jet
™
Printer
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
1
2
Pull the orange tab off the yellow ink tank
(BCI-3eY), then remove and discard the
plastic wrapper.
Twist off and discard the orange
protective cap.
NOTE:
To avoid spilling ink, never press on
the sides of an ink tank.
Insert the ink tank into the correct slot.
(Refer to the color guide on the printhead.)
Press down gently until the ink tank locks
into place.
Insert the remaining three ink tanks into
their assigned slots.
3
4
Close the front cover and attach the
paper rest and output tray.
5
3
Electrical contacts
1
Gently slide the printhead into the holder.
The printhead will rest at a slight angle.
Do not press it down.
4
Remove the printhead from its package.
Turn the printhead over, then remove
the orange protective cap.
2
NOTE:
Do not touch the electrical contacts.
Lower the lock lever and gently press
it down until it locks into place.
5
Raise the gray lock lever.
Press the POWER button.
1
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
2
3
Open the front cover. The printhead holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the printhead. You will need
this later to register the product.
5
4
Carefully remove all items from the box.
1
Power Cord
S520 Series
Color Bubble Jet Printer
Documentation
and Software Kit
S520 BJ (Bubble Jet) Printhead
Paper Rest
Output Tray
Remove the shipping tape from the
front and sides of the printer.
Ink Tanks
BCI-3eC Cyan
BCI-3eM Magenta
BCI-3eBK Black
BCI-3eY Yellow
Serial number
Protective tape
Shipping Tape
POWER
Lamp
POWER
Button
Protective cap
(IEEE 1284 compliant)
Turn the printer off.
Parallel Cable
For USB Cables:
For Parallel Cables:
1
Parallel Port
Secure
Wire Clips
Parallel Cable
Port
USB Cable
Connect one end of the USB cable
to the computer, the other to the printer.
2
2
Turn the printer off.
1
Connect one end of the parallel cable to
the computer, the other to the printer.
IMPORTANT:
Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
IMPORTANT:
Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
Continue with Step 6
on side two.