Series Color Bubble Jet Printer
i
70
Start Here
Easy Setup Instructions
IMPORTANT:
Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Continue with Step 6
on side two.
TURN THE PRINTER OFF.
Connect the USB cable to the
computer, the other to the printer.
USB
connection
port
USB
plug
DC
plug
Remove the BCI-15 Black ink tank
from its package.
You
MUST
remove the protective cap.
T
Insert the black ink tank into the back slot.
Press down until it locks into place.
Close the print head cover and move the
r
paper thickness lever to the right.
Using the procedure above, insert the color
ink tank into the front slot.
per Thickness
er
Open the print head cover.
Place the print head into the holder.
Lower the gray lock lever until
it is sec
Nozzles
Press in on the lock button and lift the
Remove the print head from its package.
Turn the print head over and remove the
protective cap from the print head cover.
NOTE:
Do not touch the print head nozzles.
Lift open the paper rest and
TURN THE
PRINTER ON
. The printer will initialize.
Plug the power cord into the power outlet.
Plug the power cord into the AC adapter.
Connect the DC plug to the printer.
Remove all shipping tape and materials
from the unit.
Shipping Tape
Serial #
Location
Power cord
DC plug
Paper Output Slot Cover
Carefully remove all items from the box.
Documentation
and Software Kit
Power Cord
i
70
Series Print Head
i
70
Series Printer
BCI-15 Color
Ink Tank
Ink Tank
NOTE:
Electronic User’s Guide is included
on the CD-ROM.
1
2
3
4
1
3
4
5
1
2
1
2
3
4
5
6
1
2
2
Prepare the Printer
1
Unpack the Printer
3
Install the Print Head
4
Install the Ink Tanks
5
Connect to Your Computer
