![background image](http://html1.mh-extra.com/html/daikin/sky-air-b-series-r-410a/sky-air-b-series-r-410a_service-manual_2460071092.webp)
Si21-205
Indoor Unit
Function and Control
81
Using Conditions
for Remote
Controller
Thermostat
(Applicable models: FHQ & FFQ only)
Remote controller thermostat is equipped only in wired remote controller.
Even when “ use remote controller thermostat ” is selected in service mode, the remote
controller thermostat may not be used.
< Conditions not to use >
1. When the remote controller thermostat malfunctions.
2. When the one remote controller group control is applied.
( Excluding simultaneous ON/OFF operation )
3. When conditions relating set temperature with remote controller and suction air temperature
are out of the operating zone of remote controller thermostat shown in below diagram.
( Excluding when automatic operation mode is selected. Whenever operation is in the
automatic mode, remote controller thermostat can be used. )
ts : Set temp. (°C)
For cooling
Remote controller thermostat
operating zone
Differential zone
Th : Suction air temp. (°C)
Remote controller thermostat
operating zone
Differential zone
ts : Set temp. (°C)
For heating
Th : Suction air temp. (°C)
Summary of Contents for Sky Air B-Series R-410A
