![background image](http://html1.mh-extra.com/html/daikin/sky-air-b-series-r-410a/sky-air-b-series-r-410a_service-manual_2460071264.webp)
Si21-205
FFQ25/35/50/60BV1B
Removal Procedure
253
1.14 Replacement of Receiver Section of Wireless Remote
Controller
Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure
Points
1. Removing the receiver
section
1
Remove two screws of
the transmission parts
box to remove the box.
2
Cut the tie wrap fixing
transmission parts box
and harness and
disconnect the
connector X1A.
3
Disconnect the lead
wire of the transmission
parts box from the
connector X24A on the
indoor unit PC board.
4
Removing the
decoration panel
Refer to the
"Removal of
Decoration Panel"
5
Pull out the lead wire of
receiver section from
wiring groove.
6
Push three claws on the
rear side of panel to
remove the corner
cover (receiver
section).
X24
Transmission parts box
(S2695)
(S2694)
Tie wrap
X2A
X1A
(S2696)
Decoration panel
Push three claws to remove
the corner cover.
Lead wire of receiver section
(S2697)
(S2698)
(S2699)
Summary of Contents for Sky Air B-Series R-410A
