DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
180
Figure 6- 148. PIM-DM Interface Settings - Edit window
The following fields can be set or viewed:
Parameter
Description
Interface Name
Allows the entry of the name of the IP interface for which PIM-DM is to be configured.
This must be a previously defined IP interface.
IP Address
Displays the IP address for the IP interface named above.
Hello Interval (1-
18724)
This field allows an entry of between
1
and
18724
seconds and determines the
interval between sending Hello packets to other routers on the network. The default is
30
seconds.
Join/Prune Interval (1-
18724)
This field allows an entry of between
1
and
18724
seconds. This interval also
determines the time interval the router uses to automatically remove prune
information from a branch of a multicast delivery tree and begin to flood multicast
messages to all branches of that delivery tree. These two actions are equivalent. The
default is
60
seconds.
State
This field can be toggled between
Enabled
and
Disabled
using the pull-down menu,
and is used to enable or disable PIM-DM for the IP interface. The default is
Disabled
.
Click
Apply
to implement changes made. Click
Show All PIM-DM Interface Entries
to return to the
PIM-DM Interface
Table
.
Summary of Contents for TM DES-6500
