D-Link TM DES-6500 Manual Download

Page: 24 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual

Mounting the Switch in a Standard 19" Rack

Figure 2- 3. Installing Switch in a rack

Power On

Plug one end of the AC power cord into the power connector of the Switch and the other end into the local power source
outlet.

After the Switch is powered on, the LED indicators will momentarily blink. This blinking of the LED indicators represents
a reset of the system.

Power Failure

As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch back in.

External Redundant Power System

The Switch supports dual, current-sharing, redundant power supplies, located at the bottom front of the chassis.

Figure 2- 4. Redundant Power Supply

Summary of Contents for TM DES-6500

































































































































































































































































































































































Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands

D-Link TM DES-6500, Manual

Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands