DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
249
Port Access Control
The following screens are used to monitor 802.1x statistics of the Switch, on a per port basis. To view the
Port Access
Control
screens, open the monitoring folder and click the
Port Access Control
folder. There are six screens to monitor.
NOTE:
The
Authenticator State
,
Authenticator Statistics
, Authenticator
Session Statistics
and
Authenticator Diagnostics
windows in this
section cannot be viewed on the DES-6500 switch unless 802.1x is
enabled by port or by MAC address. To enable 802.1x, go to the Port
Access Entity folder in the configuration folder and select the heading
802.1X Auth Mode Settings
.
Authenticator State
The following section describes the 802.1X Status on the Switch. To view the Authenticator State, click
Monitoring >
Port Access Control > Authenticator State.
Figure 9- 17. Authenticator State window – Port-based 802.1x
Summary of Contents for TM DES-6500
