DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
68
The
Static Multicast Forwarding Settings
page displays all of the entries made into the Switch's static multicast
forwarding table. Click the
Add
button to open the
Setup Static Multicast Forwarding Table
, as shown below:
Figure 6- 30. Setup Static Multicast Forwarding Table
The following parameters can be set:
Parameter Description
Unit
Choose the Switch ID number of the Switch in the switch stack to be modified.
VID
The VLAN ID of the VLAN to which the corresponding MAC address belongs.
Multicast MAC
Address
The MAC address of the static source of multicast packets. This must be a multicast
MAC address.
Port
Allows the selection of ports that will be members of the static multicast group. The
options are:
None
- No restrictions on the port dynamically joining the multicast group. When None
is chosen, the port will not be a member of the Static Multicast Group.
Egress
- The port is a static member of the multicast group.
Click
Apply
to implement the changes made. To delete an entry in the
Static Multicast Forwarding Table,
click the
corresponding
under the
Delete
heading. Click the
Show All Multicast Forwarding Entries
link to return to the
Static
Multicast Forwarding Settings
window.
Summary of Contents for TM DES-6500
