DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
78
Port Settings
Allows an individual port to be specified as member of a VLAN.
Tag
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will
designate the port as Tagged.
None
Allows an individual port to be specified as a non-VLAN member.
Egress
Select this to specify the port as a static member of the VLAN. Egress member ports are
ports that will be transmitting traffic for the VLAN. These ports can be either tagged or
untagged.
Forbidden
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Click
Apply
to implement changes made. Click the
Show All Static VLAN Entries
link to return to the
Current 802.1Q
Static VLAN Entries
window.
GVRP Settings
In the
Configuration
menu, open the
VLANs
folder and click
GVRP Settings
.
The
GVRP Settings
dialog box, shown below, allows you to determine whether the Switch will share its VLAN
configuration information with other GARP VLAN Registration Protocol (GVRP) enabled switches. In addition,
Ingress
Checking
can be used to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port.
Results can be seen in the table under the configuration settings, as seen below.
Figure 6- 37. GVRP Settings and GVRP Table window
The following fields can be set:
Summary of Contents for TM DES-6500
