D-Link TM DES-6500, Manual

Page: 63 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
62
STP Instance Settings
The following window displays MSTIs currently set on the Switch. To view the following table, click Configuration >
Spanning Tree > STP Instance Settings :
Figure 6- 24. STP Instance Settings
The following information is displayed:
Parameter Description
Instance Type
Displays the instance type(s) currently configured on the Switch. Each instance type
is classified by a MSTI ID. CIST refers to the default MSTI configuration set on the
Switch.
Instance Status Displays the current status of the corresponding MSTI ID
Instance Priority Displays the priority of the corresponding MSTI Instance Type. The lowest priority will
be the root bridge.
Priority Click the Modify button to change the priority of the MSTI. This will open the Instance
ID Settings window to configure. The Type field in this window will be permanently set
to Set Priority Only . Enter the new priority in the Priority field and click Apply to
implement the new priority setting.
Click Apply to implement changes made.
Clicking the hyperlinked name will allow the user to view the current parameters set for the MSTI Instance.
Figure 6- 25. STP Instance Operational Status – CIST