D-Link TM DES-6500 Manual Download Page 219

Page: 219 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual

218

Figure 8- 29. SNMP User Table Display

The following parameters are displayed:

Parameter Description

User Name

An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.

Group Name

This name is used to specify the SNMP group created can request SNMP messages.

SNMP Version

- Indicates that SNMP version 1 is in use.

- Indicates that SNMP version 2 is in use.

- Indicates that SNMP version 3 is in use.

Auth-Protocol

None

- Indicates that no authorization protocol is in use.

MD5

- Indicates that the HMAC-MD5-96 authentication level will be used.

SHA

- Indicates that the HMAC-SHA authentication protocol will be used.

Priv-Protocol

None

- Indicates that no authorization protocol is in use.

DES

- Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-

56) standard.

To return to the

SNMP User Table

, click the

Show All SNMP User Table Entries

link.

To add a new entry to the S

NMP User Table Configuration

, click on the

Add

button on the

SNMP User Table

page.

This will open the

SNMP User Table Configuration

page, as shown below.

Figure 8- 30. SNMP User Table Configuration window

Summary of Contents for TM DES-6500

































































































































































































































































































































































Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands

D-Link TM DES-6500, Manual

Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands