D-Link TM DES-6500 Manual Download

Page: 286 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual

285

Member Switch Icon

Figure 11- 11. Right Clicking a Member icon

The following options may appear for the user to configure:

•

Collapse

- to collapse the group that will be represented by a single icon.

•

Expand

- to expand the SIM group, in detail.

•

Remove from group

- remove a member from a group.

•

Configure

- launch the web management to configure the Switch.

•

Property

- to pop up a window to display the device information.

Figure 11- 12. Property window

Candidate Switch Icon

Figure 11- 13. Right Clicking a Candidate icon

The following options may appear for the user to configure:

•

Collapse

- to collapse the group that will be represented by a single icon.

•

Expand

- to expand the SIM group, in detail.

Summary of Contents for TM DES-6500

































































































































































































































































































































































Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands

D-Link TM DES-6500, Manual

Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands