1
What’s in the box
Connect the hardware
TransPort WR41
2
Power Supply
(some models may
have a DC power cord
or have no
power supply)
Mounting Tips:
Position the Digi TransPort WR41 on a flat, level surface or via wall-mount, rackmount, or DIN rail mounting brackets in a location with adequate ventilation.
The unit is designed for indoor use. Do not expose the unit to extremes of heat or cold, strong magnetic fields, or liquids.
Wi-Fi models only
: Connect the Wi-Fi antennas to the
WIFI PRIMARY
and
WIFI SECONDARY
antenna connectors.
Connect the Cellular antennas to the
WWAN PRIMARY
and
WWAN SECONDARY
(if fitted) connector.
Quick Start Guide
TransPort WR41
EVDO Models
a
b
Required additional equipment
Sh
ift
A personal computer
Connect the power supply. Depending on model, the unit will either come
with an AC power supply, locking barrel DC power cord, or a Fleet power cord.
AC Power Supply
: Connect the locking barrel end of the power supply to the
MAIN
connector on the unit, and plug the other end into a wall outlet.
International units come with interchangeable Power Supply Adapters
which can be used according to regional needs.
DC Power Cord:
Connect the locking barrel or the 4-pin connector of the cord to
the
MAIN
power port
on the unit, and wire the four bare wires accordingly to your
needs. The red and black wires provide basic DC power input, and the blue and
green wires are programmable signal lines.
Fleet Power Cord
: Connect the 4-pin connector to the
MAIN
port
on the unit. Connect the locking barrel jack to the
MAIN
connector on
the unit. Finally, wire the two bare wires according to your needs.
For sample wiring diagrams and pinout information,
see the
Fleet I/O Interface User's Guides
, online at
http://ftp1.digi.com/support/documentation/transport/technicalnotes.htm.
d
Power Supply Adapters
(non-US models only)
Connect one end of the Ethernet cable to the
LAN 0
port on the unit and the other end
to a LAN port on a PC.
c
Optional provided equipment
Depending on model and configuration options, the box contains additional cables/antennas as appropriate.
GPS Antenna
(GPS models only)
Wi-Fi Antenna(s)
(Wi-Fi models only)
Telemetry Connector
(Telemetry models only)
15-Pin Telemetry Cable
(Fleet models only)
Fleet Power Cord (Fleet models only)
If any item is missing or damaged, please contact your supplier.
Note any damage that may have occurred during shipping and report
it to the supplier.
Ethernet Cable
b
b
f
d
Cellular Antenna
(0, 1, or 2)
© 2015 Digi International Inc. Digi TransPort and the Digi logo are trademarks or registered trademarks of Digi International Inc. in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
PSTN Cable
(PSTN and DialServ
models only)
a
a
