D-Link TM DES-6500, Manual

Page: 169 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
168
Stub Import
Summary LSA Displays whether or not the selected Area will allow Summary Link-State
Advertisements (Summary LSAs) to be imported into the area from other areas.
Stub Default Cost Displays the default cost for the route to the stub of between 0 and 65,535. The default
is 1.
OSPF Interface Settings
To set up OSPF interfaces, click Configuration > Layer 3 IP Networking > OSPF > OSPF Interface Settings to view
OSPF settings for existing IP interfaces. If there are no IP interfaces configured (besides the default System interface), only
the System interface settings will appear listed. To change settings for in IP interface, click on the hyperlinked name of the
interface to see the configuration menu for that interface.
Figure 6- 131. OSPF Interface Settings window
Figure 6- 132. OSPF Interface Settings - Edit window
Configure each IP interface individually using the OSPF Interface Settings - Edit menu. Click the Apply button when
you have entered the settings. The new configuration appears listed in the OSPF Interface Settings table. To return to the
OSPF Interface Settings table, click the Show All OSPF Interface Entries link.
OSPF interface settings are described below. Some OSPF interface settings require previously configured OSPF settings.
Read the descriptions below for details.