manualshive.com logo in svg

D-Link TM DES-6500, Manual

The D-Link TM DES-6500 offers advanced networking capabilities with a user-friendly Command Line Interface Reference Manual. This essential manual provides detailed instructions and configuration guidance for optimizing the product's performance. Download this comprehensive manual for free from manualshive.com, and unleash the full potential of your D-Link TM DES-6500.

Share
Download
background image

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual 

2 

Table of Contents 

 
Preface................................................................................................................................................... 10

 

Intended Readers ...............................................................................................................................................................11

 

Typographical Conventions............................................................................................................................................................. 11

 

Notes, Notices, and Cautions.............................................................................................................................................11

 

Safety Instructions.............................................................................................................................................................12

 

Safety Cautions................................................................................................................................................................................ 12

 

General Precautions for Rack-Mountable Products ......................................................................................................................... 13

 

Protecting Against Electrostatic Discharge...................................................................................................................................... 14

 

Introduction.......................................................................................................................................... 15

 

Switch Description ............................................................................................................................................................15

 

Features............................................................................................................................................................................................ 15

 

DES-6500 chassis contains 9 slots to install the following available modules ........................................................................... 17

 

DES-6504 12 port 100BASE-FX (SFF) Fast Ethernet Switch module ...................................................................................... 17

 

DES-6505 8-port 1000BASE-SX (SC) Gigabit Ethernet Switch module................................................................................... 17

 

DES-6507 12-port 10BASE-T/100BASE-TX/1000BASE-T Switch module ............................................................................ 17

 

DES-6509 12-port Mini GBIC(SFP) switch module.................................................................................................................. 17

 

DES-6508 16-port 10BASE-T/100BASE-TX Fast Ethernet Switch module ............................................................................. 18

 

DES-6506 Patch Panel ............................................................................................................................................................... 18

 

DES-6511 Power Supply Modules............................................................................................................................................. 18

 

DES-6512 2-port 10 GE XFP Switch Module............................................................................................................................ 18

 

Ethernet Technology .........................................................................................................................................................19

 

Fast Ethernet.................................................................................................................................................................................... 19

 

Gigabit Ethernet Technology........................................................................................................................................................... 19

 

Switching Technology ..................................................................................................................................................................... 19

 

Front-Panel Components and LED Indicators ................................................................................................................................. 20

 

Installation ............................................................................................................................................ 21

 

Package Contents............................................................................................................................................................................. 21

 

Before You Connect to the Network................................................................................................................................................ 21

 

Installing the Switch without the Rack ............................................................................................................................................ 22

 

Installing the Switch in a Rack ........................................................................................................................................................ 22

 

Mounting the Switch in a Standard 19" Rack............................................................................................................................. 23

 

Power On.................................................................................................................................................................................... 23

 

Power Failure ............................................................................................................................................................................. 23

 

External Redundant Power System ............................................................................................................................................ 23

 

Connecting the Switch ......................................................................................................................... 24

 

Switch to End Node ......................................................................................................................................................................... 24

 

Switch to Hub or Switch.................................................................................................................................................................. 25

 

Using the DES-6500 as a Network Backbone ................................................................................................................................. 26

 

Summary of Contents for TM DES-6500

































































































































































































































































































































































Reviews:

No comments

Related manuals for TM DES-6500

D-Link DES-3526 - Switch - Stackable Manual preview
DES-3526 - Switch - Stackable
Brand: D-Link Pages: 258
ADC PG-FlexPlus AMU-912 Manual preview
PG-FlexPlus AMU-912
Brand: ADC Pages: 130
IBM totalstorage 200 Service Manual preview
totalstorage 200
Brand: IBM Pages: 180
Delta Electronics DTE-20T Instruction Sheet preview
DTE-20T
Brand: Delta Electronics Pages: 1
TRENDnet TW-100 Specifications preview
TW-100
Brand: TRENDnet Pages: 2
Weidmuller IE-SW-VL16-14TX-2SC Hardware Installation Manual preview
IE-SW-VL16-14TX-2SC
Brand: Weidmuller Pages: 17
Devolo Magic WiFi mini Ek Manual preview
Magic WiFi mini Ek
Brand: Devolo Pages: 22
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
Radicom WiFiHU2S-a/c Preliminary Designer’S Manual preview
WiFiHU2S-a/c
Brand: Radicom Pages: 27
TDK InvenSense RoboKit1 Hardware Reference Manual preview
InvenSense RoboKit1
Brand: TDK Pages: 13
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Brand: Ubiquiti Pages: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Brand: CG Pages: 112
Weidmuller IE-SW-VL09T-6TX-3SC Hardware Installation Manual preview
IE-SW-VL09T-6TX-3SC
Brand: Weidmuller Pages: 14
Netstor NA762TB3 User Manual preview
NA762TB3
Brand: Netstor Pages: 17
Hirschmann MM2-2FXM3/2TX1 Description And Operating Instructions preview
MM2-2FXM3/2TX1
Brand: Hirschmann Pages: 8
COMBA TB-1800 Equipment Manual preview
TB-1800
Brand: COMBA Pages: 57
NetApp SG1000 Troubleshooting Installations preview
SG1000
Brand: NetApp Pages: 10
Johnson Controls WT-ROUTER Installation Instructions preview
WT-ROUTER
Brand: Johnson Controls Pages: 5

Brands by name

Popular brands

Load more brands