D-Link TM DES-6500 Manual Download

Page: 337 / 352

336

Technische Unterstützung

Aktualisierte Versionen von Software und Benutzerhandbuch

finden Sie auf der Website von D-Link.

D-Link bietet kostenfreie technische Unterstützung für Kunden

innerhalb Deutschlands, Österreichs, der Schweiz und

Osteuropas.

Unsere Kunden können technische Unterstützung über unsere

Website, per E-Mail oder telefonisch anfordern.

Web: http://www.dlink.de

E-Mail: [email protected]

Telefon: +49 (1805)2787

0,12€/Min aus dem Festnetz der Deutschen Telekom.

Telefonische technische Unterstützung erhalten Sie Montags bis

Freitags von 09.00 bis 17.30 Uhr.

Wenn Sie Kunde von D-Link außerhalb Deutschlands,

Österreichs, der Schweiz und Osteuropas sind, wenden Sie

sich bitte an die zuständige Niederlassung aus der Liste im

Benutzerhandbuch.

Summary of Contents for TM DES-6500

































































































































































































































































































































































Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands

D-Link TM DES-6500, Manual

Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands