DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
95
SNTP Settings
Time Settings
To configure the time settings for the Switch, open the
Configuration
folder, then the
SNTP
folder and click on the
Time
Settings
link, revealing the following screen for the user to configure.
Figure 6- 53. Current Time Settings window
The following parameters can be set or are displayed:
Parameter Description
Time Settings - Current Time
System Boot Time
Displays the time when the Switch was initially started for this session.
Current Time
Displays the current time.
Time Source
Displays the source of the time settings viewed here.
SNTP Settings
SNTP State
Use this pull-down menu to Enable or Disable SNTP.
SNTP Primary Server
The IP address of the primary server the SNTP information will be taken from.
SNTP Secondary
Server
The IP address of the secondary server the SNTP information will be taken from.
SNTP Poll Interval in
Seconds (30-99999)
The interval, in seconds, between requests for updated SNTP information.
Summary of Contents for TM DES-6500
