D-Link TM DES-6500, Manual

Page: 185 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
184
DHCP/BOOTP Relay Settings
The DHCP/ BOOTP Relay Settings allow the user to set up a server, by IP address, for relaying DHCP / BOOTP
information to the Switch. The user may enter a previously configured IP interface on the Switch that will be connected
directly to the DHCP/BOOTP server using the following window. Properly configured settings will be displayed in the
BOOTP Relay Table at the bottom of the following window, once the user clicks the Add button under the Apply
heading. The user may add up to four server IPs per IP interface on the Switch. Entries may be deleted by clicking it’s
corresponding .
Figure 6- 153. DHCP/BOOTP Relay Interface Settings and DHCP/BOOTP Relay Interface Table window
The following parameters may be configured or viewed.
Parameter Description
Interface Name The IP interface on the Switch that will be connected directly to the Server.
IP Address Enter the IP address of the DHCP/BOOTP server. Up to four server IPs can be
configured per IP Interface