D-Link TM DES-6500, Manual

Page: 93 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
92
System Log Server
The Switch can send Syslog messages to up to four designated servers using the System Log Host window. In the
Configuration folder, click System Log Host , to view the screen shown below.
Figure 6- 50. System Log Host window
The parameters configured for adding and editing System Log Server settings are the same. To add a new Syslog Server,
click the Add button. To modify a current entry, click the hyperlinked number of the server in the Index field. Both actions
will result in the same screen to configure. See the table below for a description of the parameters in the following window.
Figure 6- 51. Configure System Log Server - Edit
The following parameters can be set:
Parameter Description
Index Syslog server settings index (1-4).
Server IP The IP address of the Syslog server.
Severity This drop-down menu allows you to select the level of messages that will be sent. The
options are
Warning , Informational , and All .
Facility Some of the operating system daemons and processes have been assigned Facility
values. Processes and daemons that have not been explicitly assigned a Facility may
use any of the "local use" facilities or they may use the "user-level" Facility. Those
Facilities that have been designated are shown in the following.
Bold font denotes the
facility values that the Switch currently implements.
Numerical Facility
Code
0 kernel messages
1 user-level messages