D-Link TM DES-6500 Manual Download Page 336

Page: 336 / 352

335

Technical Support

You can find software updates and user documentation on the D-Link websites.

D-Link provides free technical support for customers within Canada,

the United Kingdom, and Ireland.

Customers can contact D-Link technical support through our websites,

or by phone.

For Customers within

The United Kingdom & Ireland:

D-Link UK & Ireland Technical Support over the Telephone:

(08456 12 0003 (United Kingdom)

+44 8456 12 0003 (Ireland)

Monday to Friday 8:00 am to 10:00 pm GMT

Sat & Sun 10.00 am to 7.00 pm GMT

D-Link UK & Ireland Technical Support over the Internet:

http://www.dlink.co.uk

ftp://ftp.dlink.co.uk

For Customers within Canada:

D-Link Canada Technical Support over the Telephone:

1-800-361-5265 (Canada)

Monday to Friday 7:30 am to 12:00 am EST

D-Link Canada Technical Support over the Internet:

http://support.dlink.ca

email: [email protected]

Summary of Contents for TM DES-6500

































































































































































































































































































































































Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands

D-Link TM DES-6500, Manual

Search results

Summary of Contents for TM DES-6500

Reviews:

Related manuals for TM DES-6500

Brands by name

Popular brands