DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
138
Using a 10.xxx.xxx.xxx IP address notation, the above example would give six network addresses and six subnets.
Any IP address from the allowed range of IP addresses for each subnet can be chosen as an IP address for an IP interface
on the switch.
For this example, we have chosen the next IP address above the network address for the IP interface’s IP Address:
VLAN Name
VID
Network Number
IP Address
System (default)
1
10.32.0.0
10.32.0.1
Engineer 2
10.64.0.0 10.64.0.1
Marketing 3
10.96.0.0 10.96.0.1
Finance 4
10.128.0.0
10.128.0.1
Sales 5
10.160.0.0
10.160.0.1
Backbone 6
10.192.0.0 10.192.0.1
Table 6- 5. VLAN Example - Assigned IP Interfaces
The six IP interfaces, each with an IP address (listed in the table above), and a subnet mask of 255.224.0.0 can be entered
into the
Setup IP Interface
window.
To setup IP Interfaces on the Switch:
Go to the
Configuration
folder, and click on the
Layer 3 IP Networking
folder, and then click on the
IP Interfaces
Table
link to open the following dialog box:
Figure 6- 102. IP Interface Table
To setup a new IP interface, click the
Add
button. To edit an existing IP Interface entry, click on an entry under the
Interface Name
heading. Both actions will result in the same screen to configure, as shown below.
Summary of Contents for TM DES-6500
