D-Link TM DES-6500, Manual

Page: 95 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
94
To configure the system severity levels, open the following window by clicking Configuration > System Severity Log in
the main menu.
Figure 6- 52. System Severity Log Configurations window
The user may set the following parameters to configure the System Severity . Configurations will be displayed in the
System Severity Table . Click Apply to implement changes made.
Parameter Description
System Severity Log Choose one of the following to identify what type of severity warnings are to be sent to
the switch log file.
•
critical – Entering this parameter along with the proper destination, stated
above, will instruct the Switch to send only critical events to the Switch’s log
or SNMP agent.
•
warning – Entering this parameter along with the proper destination, stated
above, will instruct the Switch to send critical and warning events to the
Switch’s log and/or SNMP agent.
•
information – Entering this parameter along with the proper destination,
stated above, will instruct the Switch to send informational, warning and
critical events to the Switch’s log and/or SNMP agent.
System Severity Trap Choose one of the following to identify what type of severity warnings are to be sent to
the SNMP trap.
•
critical – Entering this parameter along with the proper destination, stated
above, will instruct the Switch to send only critical events to the Switch’s log
or SNMP agent.
•
warning – Entering this parameter along with the proper destination, stated
above, will instruct the Switch to send critical and warning events to the
Switch’s log and/or SNMP agent.
•
information – Entering this parameter along with the proper destination,
stated above, will instruct the Switch to send informational, warning and
critical events to the Switch’s log and/or SNMP agent.