D-Link TM DES-6500, Manual

Page: 100 / 352

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
99
Parameter Description
Profile ID (1-8) Type in a unique identifier number for this profile set. This value can be set from 1 - 8.
Type Select profile based on Ethernet (MAC Address), IP address or packet content mask.
This will change the menu according to the requirements for the type of profile.
•
Select Ethernet to instruct the Switch to examine the layer 2 part of each
packet header.
•
Select IP to instruct the Switch to examine the IP address in each frame's
header.
•
Select Packet Content Mask to specify a mask to hide the content of the
packet header.
VLAN Selecting this option instructs the Switch to examine the VLAN identifier of each
packet header and use this as the full or partial criterion for forwarding.
Source MAC Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Destination MAC Mask - Enter a MAC address mask for the destination MAC
address.
802.1p Selecting this option instructs the Switch to examine the 802.1p priority value of each
packet header and use this as the, or part of the criterion for forwarding.
Ethernet type Selecting this option instructs the Switch to examine the Ethernet type value in each
frame's header.
Port The Access Profile Configuration may be configured on a per-port basis. The port list
is specified by listing the lowest slot number and the beginning port number on that
slot, separated by a colon. Then the highest slot number, and the highest port number
of the range (also separated by a colon) are specified. The beginning and end of the
port list range are separated by a dash. For example, 1:3 specifies slot number 1, port
3. 2:4 specifies slot number 2, port 4. 1:3-2:4 specifies all of the ports between slot 1,
port 3 and slot 2, port 4
−
in numerical order.