INSTRUCTIONS
EXTERNAL INTERFACE BOX
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Sep. 2021
A7626W-1EX-2
Printed in Japan
© 2021 Icom Inc.
–
1
–
–
4
–
CT-M500
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS
carefully and completely
before using this product.
■
Important
SAVE THESE INSTRUCTIONS
— These instructions
contain important operating instructions for the CT-M500.
This device connects to a transceiver through a Wireless
LAN (WLAN) and expands the transceiver’s functions.
For the WLAN setting, the functions that you can operate
when connecting to the transceiver, and so on, see the
transceiver’s manual for details.
The transceiver’s manual can be
the
following internet address:
https://www.icomjapan.com/support/
L
These instructions are described based on the CT-M500 firmware
version 1.00.
Icom, Icom Inc. and the Icom logo are registered trademarks
of Icom Incorporated (Japan) in Japan, the United States,
the United Kingdom, Germany, France, Spain, Russia,
Australia, New Zealand, and/or other countries.
NMEA 2000 is a trademark of the National Maritime
Electronics Association, Inc.
All other products or brands are registered trademarks or
trademarks of their respective holders.
Icom is not responsible for the destruction, damage to, or
performance of any Icom or non-Icom equipment, if the
malfunction is because of:
•
Force majeure, including, but not limited to, fires,
earthquakes, storms, floods, lightning, other natural
disasters, disturbances, riots, war, or radioactive
contamination.
• The use of Icom devices with any equipment that is not
manufactured or approved by Icom.
■
Explicit definitions
WORD
DEFINITION
R
WARNING!
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
■
Définitions explicites
TERME
DÉFINITION
R
AVERTISSEMENT !
Risque de blessures corporelles,
d’incendie ou de choc électrique.
MISE EN GARDE
Risque de dégât matériel.
REMARQUE
Inconvénient seulement, en cas de
nonrespect. Absence de risque de
blessures corporelles, d’incendie
ou de choc électrique.
■
FCC information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications to this device, not expressly
approved by Icom Inc., could void your authority to operate this
device under FCC regulations.
■
Information FCC
Cet appareil est conforme à la partie 15 de la réglementation
FCC. Son fonctionnement est soumis à la condition que cet
appareil ne provoque pas d’interférences nocives.
Cet équipement a été testé et reconnu conforme aux limites
fixées pour un appareil numérique de classe B, conformément à
la partie 15 de la réglementation FCC. Ces limites ont été fixées
afin d'assurer une protection raisonnable contre les interférences
nocives dans une installation résidentielle. Cet équipement génère,
utilise et peut émettre un rayonnement de fréquence radio. S'il n'a
pas été installé conformément aux instructions, il peut par ailleurs
créer des interférences perturbant les communications radio.
Toutefois, il n'y a aucune garantie que les interférences ne se
produiront pas dans une installation particulière. Si cet équipement
crée des interférences perturbant la réception de la radio ou de
la télévision, comme cela peut être déterminé en éteignant et en
allumant l'équipement, l'utilisateur est invité à essayer de corriger
l'interférence en prenant une ou plusieurs des mesures ci-après :
•
Réorienter ou changer de place l'antenne de réception.
•
Éloigner l'équipement et le récepteur.
•
Connecter l'équipement sur une prise sur un autre circuit que
celui sur lequel le récepteur est connecté.
•Faire appel au revendeur ou à un technicien radio/TV expérimenté.
MISE EN GARDE :
Tout changement ou modification, non
expressément approuvé par Icom Inc., peut annuler l’autorisation de
l’utilisateur à utiliser cet appareil conformément à la réglementation FCC.
■
Installing
You can mount the device on a dashboard using the
universal mounting bracket supplied with your device.
CAUTION:
•
KEEP
the device at least 1 meter (3.3 ft) away from the
vessel’s magnetic navigation compass.
•
INSTALL
the device within approximately 15 meters
from the transceiver, and in a place where there are no
obstacles between the device and the transceiver.
1. Mount the bracket securely to a surface which is more
than 10 mm thick and can support more than 5 kg using
the 4 supplied screws (5 × 20 mm).
NOTE:
When mounting the device on a board, fix the
bracket to the board using the user supplied bolts and
nuts, as shown below.
2. Attach the device to the bracket.
Mounting Example
Spring washer
Flat washer
■
Specifications and options
D
Specifications
General
Operating
temperature range –20°C ~ +60°C, –4ºF ~ +140ºF
Power supply
requirement
Negative ground:
13.8 V DC nominal (10.8 ~ 15.9 V)
Current drain
(at 13.8 V)
3.5 A maximum
Dimensions
(approximate)
( projections not
included)
156.5 (W) × 67.6 (H) × 82.1 (D) mm,
6.2 (W) × 2.7 (H) × 3.2 (D) in
Weight
(approximate)
430 g, 15.2 oz
Wireless LAN
Wireless LAN standard IEEE802.11 b/g/n
Authentication and
Encryption
WEP (64/128 bit),
WPA-PSK (TKIP),
WPA2-PSK (AES)
Channels
1 to 13 (2.4 GHz band)
L
May differ depending on the country of use.
Output power
Less than 10 mW/MHz
Hailer
Audio output power
More than 25 W into a 4 Ω load
RX Hailer
Audio output power
More than 20 W into a 4 Ω load
D
Options
•
SP-37
HORN SPEAKER
D
Dimensions
51
(2)
66.5
(2.6)
192.2 (7.6)
137 (5.4)
156.5 (6.2)
26
(1)
67.6
(2.7)
60.8
(2.4)
84.4 (3.3)
21.3 (0.8)
172.2 (6.8)
82.1 (3.2)
Unit: mm (inch)
■
Fuse replacement
One fuse is installed in the supplied DC power cable. If the
fuse blows or the device stops functioning, track down the
source of the problem, repair it, and replace the damaged
fuse with a new one of the proper rating.
Fuse rating: 250 V 5 A
Fuse Coding explanation
Fuse Coding: F 250 V 5 A
Fuse Voltage Rating: 250 Volts
Fuse Current Rating: 5 Amperes
■
Recommendation
CLEAN THE DEVICE THOROUGHLY WITH FRESH WATER
after exposure to saltwater, and dry it before using. Otherwise, the
device’s keys may become unusable, due to salt crystallization.
NOTE:
If the device’s waterproof protection appears defective,
carefully clean it with a soft, damp (fresh water) cloth, then dry it
before operating.
The device may lose its waterproof protection if the case is
cracked or broken, or the device has been dropped.
Contact your Icom distributor or your dealer for advice.
INSTRUCTIONS
EXTERNAL INTERFACE BOX
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Sep. 2021
A7626W-1EX-2
Printed in Japan
© 2021 Icom Inc.
–
1
–
–
4
–
CT-M500
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS
carefully and completely
before using this product.
■
Important
SAVE THESE INSTRUCTIONS
— These instructions
contain important operating instructions for the CT-M500.
This device connects to a transceiver through a Wireless
LAN (WLAN) and expands the transceiver’s functions.
For the WLAN setting, the functions that you can operate
when connecting to the transceiver, and so on, see the
transceiver’s manual for details.
The transceiver’s manual can be downloaded from the
following internet address:
https://www.icomjapan.com/support/
L
These instructions are described based on the CT-M500 firmware
version 1.00.
Icom, Icom Inc. and the Icom logo are registered trademarks
of Icom Incorporated (Japan) in Japan, the United States,
the United Kingdom, Germany, France, Spain, Russia,
Australia, New Zealand, and/or other countries.
NMEA 2000 is a trademark of the National Maritime
Electronics Association, Inc.
All other products or brands are registered trademarks or
trademarks of their respective holders.
Icom is not responsible for the destruction, damage to, or
performance of any Icom or non-Icom equipment, if the
malfunction is because of:
•
Force majeure, including, but not limited to, fires,
earthquakes, storms, floods, lightning, other natural
disasters, disturbances, riots, war, or radioactive
contamination.
• The use of Icom devices with any equipment that is not
manufactured or approved by Icom.
■
Explicit definitions
WORD
DEFINITION
R
WARNING!
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injur
hock.
■
Définitions explicites
TERME
DÉFINITION
R
AVERTISSEMENT !
Risque de blessures corporelles,
d’incendie ou de choc électrique.
MISE EN GARDE
Risque de dégât matériel.
REMARQUE
Inconvénient seulement, en cas de
nonrespect. Absence de risque de
blessures corporelles, d’incendie
ou de choc électrique.
■
FCC information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications to this device, not expressly
approved by Icom Inc., could void your authority to operate this
device under FCC regulations.
■
Information FCC
Cet appareil est conforme à la partie 15 de la réglementation
FCC. Son fonctionnement est soumis à la condition que cet
appareil ne provoque pas d’interférences nocives.
Cet équipement a été testé et reconnu conforme aux limites
fixées pour un appareil numérique de classe B, conformément à
la partie 15 de la réglementation FCC. Ces limites ont été fixées
afin d'assurer une protection raisonnable contre les interférences
nocives dans une installation résidentielle. Cet équipement génère,
utilise et peut émettre un rayonnement de fréquence radio. S'il n'a
pas été installé conformément aux instructions, il peut par ailleurs
créer des interférences perturbant les communications radio.
Toutefois, il n'y a aucune garantie que les interférences ne se
produiront pas dans une installation particulière. Si cet équipement
crée des interférences perturbant la réception de la radio ou de
la télévision, comme cela peut être déterminé en éteignant et en
allumant l'équipement, l'utilisateur est invité à essayer de corriger
l'interférence en prenant une ou plusieurs des mesures ci-après :
•
Réorienter ou changer de place l'antenne de réception.
•
Éloigner l'équipement et le récepteur.
•
Connecter l'équipement sur une prise sur un autre circuit que
celui sur lequel le récepteur est connecté.
•Faire appel au revendeur ou à un technicien radio/TV expérimenté.
MISE EN GARDE :
Tout changement ou modification, non
expressément approuvé par Icom Inc., peut annuler l’autorisation de
l’utilisateur à utiliser cet appareil conformément à la réglementation FCC.
■
Installing
You can mount the device on a dashboard using the
universal mounting bracket supplied with your device.
CAUTION:
•
KEEP
the device at least 1 meter (3.3 ft) away from the
vessel’s magnetic navigation compass.
•
INSTALL
the device within approximately 15 meters
from the transceiver, and in a place where there are no
obstacles between the device and the transceiver.
1. Mount the bracket securely to a surface which is more
than 10 mm thick and can support more than 5 kg using
the 4 supplied screws (5 × 20 mm).
NOTE:
When mounting the device on a board, fix the
bracket to the board using the user supplied bolts and
nuts, as shown below.
2. Attach the device to the bracket.
Mounting Example
Spring washer
Flat washer
■
Specifications and options
D
Specifications
General
Operating
temperature range –20°C ~ +60°C, –4ºF ~ +140ºF
Power supply
requirement
Negative ground:
13.8 V DC nominal (10.8 ~ 15.9 V)
Current drain
(at 13.8 V)
3.5 A maximum
Dimensions
(approximate)
( projections not
included)
156.5 (W) × 67.6 (H) × 82.1 (D) mm,
6.2 (W) × 2.7 (H) × 3.2 (D) in
Weight
(approximate)
430 g, 15.2 oz
Wireless LAN
Wireless LAN standard IEEE802.11 b/g/n
Authentication and
Encryption
WEP (64/128 bit),
WPA-PSK (TKIP),
WPA2-PSK (AES)
Channels
1 to 13 (2.4 GHz band)
L
May differ depending on the country of use.
Output power
Less than 10 mW/MHz
Hailer
Audio output power
More than 25 W into a 4 Ω load
RX Hailer
Audio output power
More than 20 W into a 4 Ω load
D
Options
•
SP-37
HORN SPEAKER
D
Dimensions
51
(2)
66.5
(2.6)
192.2 (7.6)
137 (5.4)
156.5 (6.2)
26
(1)
67.6
(2.7)
60.8
(2.4)
84.4 (3.3)
21.3 (0.8)
172.2 (6.8)
82.1 (3.2)
Unit: mm (inch)
■
Fuse replacement
One fuse is installed in the supplied DC power cable. If the
fuse blows or the device stops functioning, track down the
source of the problem, repair it, and replace the damaged
fuse with a new one of the proper rating.
Fuse rating: 250 V 5 A
Fuse Coding explanation
Fuse Coding: F 250 V 5 A
Fuse Voltage Rating: 250 Volts
Fuse Current Rating: 5 Amperes
■
Recommendation
CLEAN THE DEVICE THOROUGHLY WITH FRESH WATER
after exposure to saltwater, and dry it before using. Otherwise, the
device’s keys may become unusable, due to salt crystallization.
NOTE:
If the device’s waterproof protection appears defective,
carefully clean it with a soft, damp (fresh water) cloth, then dry it
before operating.
The device may lose its waterproof protection if the case is
cracked or broken, or the device has been dropped.
Contact your Icom distributor or your dealer for advice.
INSTRUCTIONS
EXTERNAL INTERFACE BOX
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Sep. 2021
A7626W-1EX-2
Printed in Japan
© 2021 Icom Inc.
–
1
–
–
4
–
CT-M500
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS
carefully and completely
before using this product.
■
Important
SAVE THESE INSTRUCTIONS
— These instructions
contain important operating instructions for the CT-M500.
This device connects to a transceiver through a Wireless
LAN (WLAN) and expands the transceiver’s functions.
For the WLAN setting, the functions that you can operate
when connecting to the transceiver, and so on, see the
transceiver’s manual for details.
The transceiver’s manual can be downloaded from the
following internet address:
https://www.icomjapan.com/support/
L
These instructions are described based on the CT-M500 firmware
version 1.00.
Icom, Icom Inc. and the Icom logo are registered trademarks
of Icom Incorporated (Japan) in Japan, the United States,
the United Kingdom, Germany, France, Spain, Russia,
Australia, New Zealand, and/or other countries.
NMEA 2000 is a trademark of the National Maritime
Electronics Association, Inc.
All other products or brands are registered trademarks or
trademarks of their respective holders.
Icom is not responsible for the destruction, damage to, or
performance of any Icom or non-Icom equipment, if the
malfunction is because of:
•
Force majeure, including, but not limited to, fires,
earthquakes, storms, floods, lightning, other natural
disasters, disturbances, riots, war, or radioactive
contamination.
• The use of Icom devices with any equipment that is not
manufactured or approved by Icom.
■
Explicit definitions
WORD
DEFINITION
R
WARNING!
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment dama
NOTE
If disregarded, in
No risk
of personal injury, fire or electric shock.
■
Définitions explicites
TERME
DÉFINITION
R
AVERTISSEMENT !
Risque de blessures corporelles,
d’incendie ou de choc électrique.
MISE EN GARDE
Risque de dégât matériel.
REMARQUE
Inconvénient seulement, en cas de
nonrespect. Absence de risque de
blessures corporelles, d’incendie
ou de choc électrique.
■
FCC information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications to this device, not expressly
approved by Icom Inc., could void your authority to operate this
device under FCC regulations.
■
Information FCC
Cet appareil est conforme à la partie 15 de la réglementation
FCC. Son fonctionnement est soumis à la condition que cet
appareil ne provoque pas d’interférences nocives.
Cet équipement a été testé et reconnu conforme aux limites
fixées pour un appareil numérique de classe B, conformément à
la partie 15 de la réglementation FCC. Ces limites ont été fixées
afin d'assurer une protection raisonnable contre les interférences
nocives dans une installation résidentielle. Cet équipement génère,
utilise et peut émettre un rayonnement de fréquence radio. S'il n'a
pas été installé conformément aux instructions, il peut par ailleurs
créer des interférences perturbant les communications radio.
Toutefois, il n'y a aucune garantie que les interférences ne se
produiront pas dans une installation particulière. Si cet équipement
crée des interférences perturbant la réception de la radio ou de
la télévision, comme cela peut être déterminé en éteignant et en
allumant l'équipement, l'utilisateur est invité à essayer de corriger
l'interférence en prenant une ou plusieurs des mesures ci-après :
•
Réorienter ou changer de place l'antenne de réception.
•
Éloigner l'équipement et le récepteur.
•
Connecter l'équipement sur une prise sur un autre circuit que
celui sur lequel le récepteur est connecté.
•Faire appel au revendeur ou à un technicien radio/TV expérimenté.
MISE EN GARDE :
Tout changement ou modification, non
expressément approuvé par Icom Inc., peut annuler l’autorisation de
l’utilisateur à utiliser cet appareil conformément à la réglementation FCC.
■
Installing
You can mount the device on a dashboard using the
universal mounting bracket supplied with your device.
CAUTION:
•
KEEP
the device at least 1 meter (3.3 ft) away from the
vessel’s magnetic navigation compass.
•
INSTALL
the device within approximately 15 meters
from the transceiver, and in a place where there are no
obstacles between the device and the transceiver.
1. Mount the bracket securely to a surface which is more
than 10 mm thick and can support more than 5 kg using
the 4 supplied screws (5 × 20 mm).
NOTE:
When mounting the device on a board, fix the
bracket to the board using the user supplied bolts and
nuts, as shown below.
2. Attach the device to the bracket.
Mounting Example
Spring washer
Flat washer
■
Specifications and options
D
Specifications
General
Operating
temperature range –20°C ~ +60°C, –4ºF ~ +140ºF
Power supply
requirement
Negative ground:
13.8 V DC nominal (10.8 ~ 15.9 V)
Current drain
(at 13.8 V)
3.5 A maximum
Dimensions
(approximate)
( projections not
included)
156.5 (W) × 67.6 (H) × 82.1 (D) mm,
6.2 (W) × 2.7 (H) × 3.2 (D) in
Weight
(approximate)
430 g, 15.2 oz
Wireless LAN
Wireless LAN standard IEEE802.11 b/g/n
Authentication and
Encryption
WEP (64/128 bit),
WPA-PSK (TKIP),
WPA2-PSK (AES)
Channels
1 to 13 (2.4 GHz band)
L
May differ depending on the country of use.
Output power
Less than 10 mW/MHz
Hailer
Audio output power
More than 25 W into a 4 Ω load
RX Hailer
Audio output power
More than 20 W into a 4 Ω load
D
Options
•
SP-37
HORN SPEAKER
D
Dimensions
51
(2)
66.5
(2.6)
192.2 (7.6)
137 (5.4)
156.5 (6.2)
26
(1)
67.6
(2.7)
60.8
(2.4)
84.4 (3.3)
21.3 (0.8)
172.2 (6.8)
82.1 (3.2)
Unit: mm (inch)
■
Fuse replacement
One fuse is installed in the supplied DC power cable. If the
fuse blows or the device stops functioning, track down the
source of the problem, repair it, and replace the damaged
fuse with a new one of the proper rating.
Fuse rating: 250 V 5 A
Fuse Coding explanation
Fuse Coding: F 250 V 5 A
Fuse Voltage Rating: 250 Volts
Fuse Current Rating: 5 Amperes
■
Recommendation
CLEAN THE DEVICE THOROUGHLY WITH FRESH WATER
after exposure to saltwater, and dry it before using. Otherwise, the
device’s keys may become unusable, due to salt crystallization.
NOTE:
If the device’s waterproof protection appears defective,
carefully clean it with a soft, damp (fresh water) cloth, then dry it
before operating.
The device may lose its waterproof protection if the case is
cracked or broken, or the device has been dropped.
Contact your Icom distributor or your dealer for advice.
