Ubiquiti airCube Router Config & Install Instructions
(for Experienced Installers) v3.2
Before Pugging in the Router:
•
Make sure you have the current airCube firmware on your laptop. (www.ui.com/
download/accessories/aircube).
•
You’ll want these instructions open on your computer so you can copy UNMS key.
Power Up Router:
•
Plug POE into airCube’s gray “24V POE In” port (NOT the blue port).
•
Alternately use a 5V micro USB.
Plug/Connect Laptop to Router:
•
Connect laptop via Ethernet to port 2 or 3 on the airCube.
•
Alternatively, you can connect via Wi-Fi to the airCube -XXX Wi-Fi using the WPA2
password printed on the bottom of the router–
but be sure your computer is not seeing
other Wi-Fi sources, they may hijack your config session
.
Open airCube Dashboard in Browser and Log In:
•
Open a browser and go to https://192.168.1.1
•
Advance through “connection is not private” warnings
•
Login with username “ubnt” and the “PSWD” printed on bottom of airCube (next to QR
code).
Update Firmware:
•
Click “System” (gears icon) from black menu bar at left.
•
Under “Device Maintenance” select “Upgrade Firmware.” (Alternatively, you can select
this from the top right of the main dashboard).
•
Select the firmware file from your computer, then proceed through the steps to Verify
and Upgrade it.
•
You will need to log back into the airCube after the upgrade completes—again using the
username “ubnt” and the “PSWD” on the bottom of the router.
(continued on next page)
