Quick Installation Guide
Version 1.0
Q
uick
I
nstallation
G
uide
Introduction
PRINTED ON RECYCLED PAPER
Q I G
ORing's Transporter
series un-managed Ethernet switches are designed for
T M
industrial applications, such as rolling stock, vehicle, and railway applications.
The
is an un-managed PoE Ethernet switch with
TGXPS-1080-M12-MV
8x10/100/500/1000Base-T(X) P.S.E. which is specifically designed for the
toughest and fully compliant with EN50155 requirement.
TGXPS-1080-M12-
MV
also supports Power over Ethernet, a system to transmit electrical power,
along with data, to remote devices over standard twisted-pair cable in an
E t h e r n e t
n e t w o r k .
E a c h
s w i t c h
h a s
T G X P S - 1 0 8 0 - M 1 2 - M V
8X10/100/500/1000Base-T(X) IEEE 802.3af/at P.S.E. (Power Sourcing
Equipment) ports, but the PoE total power budget is 60Watts Max. P.S.E. is a
device (switch or hub for instance) that will provide power in a PoE setup.
TGXPS-1080-M12-MV
EN50155 Ethernet switch use M12 connectors to
ensure tight, robust connections, and guarantee reliable operation against
environmental disturbances, such as vibration and shock. In addition, the wide
operating temperature range from -40 C to 75 C can satisfy most of operating
o
o
environment.
Therefore, the switch is one of the most reliable choices for
rolling stock and highly-managed PoE Ethernet application.
While installing in the train,
is mainly used for in-train
TGXPS-1080-M12-MV
monitoring and Entertainment service due to its high-speed Gigabit Ethernet
connection and PoE capability. Devices connected will be IP camera or CCTV
for the use of train surveillance. As an unmanaged Ethernet Switch,
TGXPS-
1080-M12-MV
is not able and will not be used for any control related
application. Its main function is simply forwarding the Ethernet packet from one
Ethernet based device to another Ethernet device which are all connected to
the Switch.
Package Contents
Installation
Wall-mount
The device can be fixed to the wall. Follow the steps below to install the device on the wall.
Step 1:
Hold the
evice upright against the wall
d
Step 2:
Insert four screws through the large opening of the keyhole-shaped apertures at the
top and bottom of the unit and fasten the screw to the wall with a screwdriver.
Step 3:
Slide the
evice downwards and tighten the four screws for added stability.
d
The device is shipped with the following items. If any of these items is
missing or damaged, please contact your customer service representative
for assistance.
Preparation
Before you begin installing the switch, make sure you have all of the package
contents available.
Elevated Operating Ambient:
If installed in a closed environment, make
sure the operating ambient temperature is compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
Reduced Air Flow:
Make sure the amount of air flow required for safe
operation of the equipment is not compromised during installation.
Mechanical Loading:
Make sure the mounting of the equipment is not in a
hazardous condition due to uneven mechanical loading.
Consideration should be given to the connection of the
Circuit Overloading:
equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when
Safety & Warnings
For pin assignments of power and relay output ports, please refer to the following tables.
Contents
TGXPS-1080-M12-MV or
TGXPS-1080-M12-BP2-MV
Pictures
Number
1
Dimension
Panel Layouts
Front View
1. Power status LED
2. Power input port
3. Relay output port
4. LNK/ACT & Speed LED for Gigabit ports
(1Gbps/10Mbps/100Mbps)
5. LNK/ACT & Speed LED for Gigabit ports (500Mbps)
6. Gigabit Ethernet ports
(G5-G8 of TGXPS-1080-M12-BP2-MV are bypass ports)
7. PoE status LED
Wiring
Grounding
Grounding and wire routing help limit the effects of noise due to electromagnetic interference
(EMI). Run the ground connection from the grounding pin on the power connector to the grounding
surface prior to connecting devices.
Power port pinouts
The device supports one set of power supplies and uses the 7/8 inch
M23 5-pin male connector on the front panel for the power input.
Step 1:
Insert a power cable to the power connector on the device.
Step 2:
Rotate the outer ring of the cable connector until a snug fit is
achieved. Make sure the connection is tight.
Relay output port pinouts
Relay
N.C.
3A@24VDC
Network Connection
The device provides Ethernet ports in M12 connector type. According to the link type, the switch
uses CAT 3, 4, 5,5e UTP cables to connect to any other network devices (PCs, servers, switches,
routers, or hubs). Please refer to the following table for cable specifications.
TGXPS-1080-M12-MV Series
TGXPS-1080-M12-MV Series
1907-200-T1080MVXX1-FX010
S w i tc h
E N 5 0 1 5 5
EN50155 8-port unmanaged
Gigabit PoE Ethernet switch
I N D U S T R I A L
1
2
3
4
5
6
6
7
Instead of screwing the screws in all the way, it is advised
to leave a space of about 2mm to allow room for sliding
the switch between the wall and the screws.
The switch uses the M12 A-coded 5-pin female connector
on the front panel for relay output. Use a power cord with an
M12 A-coded 5-pin male connector to connect the relay.
The relay contacts will detect power off event to trigger
warning system.
For pin assignments of the LAN ports, please refer to the following tables.
QIG
1
Cable
Type
Max. Length
Connector
10BASE-T
Cat. 3, 4, 5 100-ohm
UTP 100 m (328 ft)
M12 A-coding connector
100BASE-TX
Cat. 5 100-ohm UTP
UTP 100 m (328 ft)
M12 A-coding connector
1000BASE-T
Cat. 5/Cat. 5e 100-ohm UTP
UTP 100 m (328ft)
M12 A-coding connector
4
5
6
7
8
2
1
3
10/100/1000Base-T(X) M12 port
PIN
Definition
1
BI_DC+
2
BI_DD+
3
BI_DD-
4
BI_DA- / PoE Vout+
5
BI_DB+ / PoE Vout-
6
BI_DA+ / PoE Vout+
7
BI_DC-
8
BI_DB- / PoE Vout-
Unit =mm (Tolerance ±0.5mm)
150.0
1
9
6
.0
1
6
0
.0
65.0
6
.5
0
1
7
0
.4
81.5
111.0
Ø5.0
Ø8.00
Relay Output
Ø4.0
1
7
5
.9
Power
Power
Relay
N.C.
3A@24VDC
N.C.
N.C.
V+
V-
TGXPS-1080-M12-BP2-MV
Power
Failure
Bypass
Power
Failure
Bypass
72~110VDC
PoE
LNK/ACT
10/100/1G
500M
G1
G5
G2
G6
G3
G7
G4
G8
4
5
6
7
8
2
1
1 BI_DC+
2 BI_DD+
3 BI_DD-
4 BI_DA- / PoE Vout+
5 BI_DB+ / PoE Vout-
6 BI_DA+ / PoE Vout+
7 BI_DC-
8 BI_DB- / PoE Vout-
G1~ G8
PoE
LNK/ACT
10/100/1G
500M
PoE
LNK/ACT
10/100/1G
500M
PoE
LNK/ACT
10/100/1G
500M
Relay Output
Power
Power
Relay
N.C.
3A@24VDC
N.C.
N.C.
V+
V-
TGXPS-1080-M12-BP2-MV
Power
Failure
Bypass
Power
Failure
Bypass
72~110VDC
PoE
LNK/ACT
10/100/1G
500M
G1
G5
G2
G6
G3
G7
G4
G8
4
5
6
7
8
2
1
1 BI_DC+
2 BI_DD+
3 BI_DD-
4 BI_DA- / PoE Vout+
5 BI_DB+ / PoE Vout-
6 BI_DA+ / PoE Vout+
7 BI_DC-
8 BI_DB- / PoE Vout-
G1~ G8
PoE
LNK/ACT
10/100/1G
500M
PoE
LNK/ACT
10/100/1G
500M
PoE
LNK/ACT
10/100/1G
500M
N.C.
N.C.
V+
V-
