DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
165
show auth_client
Description
The
show auth_client
command is used to display the current RADIUS authentication
client currently configured on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To view the current RADIUS authentication client:
DES-1228/ME:4#show auth_client
Command: show auth_client
radiusAuthClient
----------------------------------------------------------------------------------
radiusAuthClientInvalidServerAddresses 0
radiusAuthClientIdentifier D-Link
radiusAuthServerEntry 0
----------------------------------------------------------------------------------
radiusAuthServerIndex : 1
radiusAuthServerAddress : 0.0.0.0
radiusAuthClientServerPortNumber 0
radiusAuthClientRoundTripTime 0
radiusAuthClientAccessRequests 0
radiusAuthClientAccessRetransmissions 0
radiusAuthClientAccessAccepts 0
radiusAuthClientAccessRejects 0
radiusAuthClientAccessChallenges 0
radiusAuthClientMalformedAccessResponses 0
radiusAuthClientBadAuthenticators 0
radiusAuthClientPendingRequests 0
radiusAuthClientTimeouts 0
radiusAuthClientUnknownTypes 0
radiusAuthClientPacketsDropped 0
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_diagnostics
Purpose
Used to display the current authentication diagnostics.
Syntax
show auth_diagnostics {ports [<auth_portlist>}
Description
The
show auth_diagnostics
command is used to display the current authentication
diagnostics of the Switch on a per port basis.
Parameters
ports <auth_portlist>
−
Specifies a range of ports.
Restrictions
None.
Example usage:
To display the current authentication diagnostics for port 1 of module 1:
