DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
232
DES-1228/ME:4#show smtp
Command: show smtp
smtp status: Enabled
smtp server address : 166.99.66.33
smtp server port : 25
self mail address: [email protected]
Index Mail Receiver Address
-------- ---------------------------------
5
6
7
8
DES-1228/ME:4#
smtp send_testmsg
Purpose
Used to send a test message to mail recipients configured on the Switch.
Syntax
smtp send_testmsg
Description
This command is used to send test messages to all mail recipients configured on the
Switch, thus testing the configurations set and the reliability of the SMTP server.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To send a test mail message to all configured mail recipients.
DES-1228/ME:4# smtp send_testmsg
Command: smtp send_testmsg
Subject: This is a SMTP test.
Content: Hello everybody!!
Sending mail, please wait…
Success.
DES-1228/ME:4#
