DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
85
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
Loopback Detection : Enabled
LBD Recover Time : 60
DES-1228/ME:4#
Status 2 : STP enabled for RSTP
DES-1228/ME:4#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status : Enabled
STP Version : RSTP
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
Loopback Detection : Enabled
LBD Recover Time : 60
DES-1228/ME:4#
Status 3 : STP enabled for MSTP
DES-1228/ME:4#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status : Enabled
STP Version : MSTP
Max Age : 20
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
Loopback Detection : Enabled
LBD Recover Time : 60
DES-1228/ME:4#
show stp ports
Purpose
Used to display the Switch’s current STP ports configuration.
Syntax
show stp ports {<portlist>} {instance <value 0-8>}
Description
This command displays the STP ports settings for a specified port or group of ports (one
port at a time).
Parameters
<portlist>
−
Specifies a port or range of ports to be viewed. Information for a single port is
displayed. If no ports are specified the STP information for port 1 will be displayed. Users
