DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
74
Example usage:
To show Syslog host information:
DES-1228/ME:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity Facility UDP port Status
------- --------------- -------------- -------- -------- --------
1 10.1.1.2 All Local0 514 Disabled
2 10.40.2.3 All Local0 514 Disabled
3 10.21.13.1 All Local0 514 Disabled
Total Entries : 3
DES-1228/ME:4#
config log_save_timing
Purpose
Used to configure the method of saving log files to the switch’s flash memory.
Syntax
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]
Description
The
config log_save_timing
command allows the user to configure the time method
used in saving log files to the switch’s flash memory.
Parameters
time_interval <min 1-65535>
−
Use this parameter to configure the time interval that will
be implemented for saving log files. The log files will be save every x number of minutes
that are configured here.
on_demand
−
Users who choose this method will only save log files when they manually
tell the Switch to do so, using the
save
or
save log
command.
log_trigger
−
Users who choose this method will have log files saved to the Switch every
time a log event occurs on the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the time interval as every 30 minutes for saving log files
:
DES-1228/ME:4#config log_save_timing time_interval 30
Command: config log_save_timing time_interval 30
Success.
DES-1228/ME:4#
show log_save_timing
Purpose
Used to display the method configured for saving log files to the switch’s flash memory.
Syntax
show log_save_timing
Description
The
show log_save_timing
command allows the user to view the time method
configured for saving log files to the switch’s flash memory.
Parameters
None.
Restrictions
None.
