DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
110
6 off 802.1p off
7 off 802.1p off
8 off 802.1p off
9 off 802.1p off
10 off 802.1p off
11 off 802.1p off
12 off 802.1p off
13 off 802.1p off
14 off 802.1p off
15 off 802.1p off
16 off 802.1p off
17 off 802.1p off
18 off 802.1p off
19 off 802.1p off
20 off 802.1p off
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config cos port_mapping
Purpose
Used to map a specific port to one of the hardware queues available on the switch.
Syntax
config cos port_mapping class [ 0 | 3 ] port [<portlist> | all]
Description
The config cos port_mapping command is used to configure port-to-class CoS mapping.
Parameters
0-3
−
The number of the switch’s hardware priority queue. The switch has eight hardware
priority queues available. They are numbered between 0 (the lowest priority queue) and 3
(the highest priority queue).
<portlist>
−
Specifies a port or range of ports to be configured.
all
−
To set all ports in the system at once, you may use the “all” parameter.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure a specific CoS queue to be mapped to a destination port 1:
DES-1228/ME:4# config cos port_mapping class 3 port 1
Command: config cos port_mapping class 3 port 1
Success.
DES-1228/ME:4#
