DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
260
Example usage
To configure the LLDP forward_lldpdu:
DES-1228/ME:4# config lldp forward_ message enable
Command: config lldp forward_ message enable
Success.
DES-1228/ME:4#
show lldp
Purpose
This command displays the switch’s general LLDP configuration status.
Syntax
show lldp
Description
This command displays the switch’s general LLDP configuration status.
Parameters
None.
Restrictions
None.
Example usage
To display the LLDP system level configuration status:
DES-1228/ME:4# show lldp
Command: show lldp
LLDP system information
Chassis Id Subtype : MACADDRESS
Chassis Id : 00-15-E9-41-5A-A7
System Name : D-Link
System Description : Metro Ethernet Switch
System Capabilities : Repeater, Bridge,
LLDP Configurations
LLDP Status : Disable
LLDP Forward Status : Disable
Message Tx Interval : 30
Message Tx Hold Multiplier: 4
ReInit delay : 2
Tx Delay : 2
Notification Interval : 5
DES-1228/ME:4#
show lldp mgt_addr
Purpose
Used to display the lldp management address information.
Syntax
show lldp mgt_addr {ipv4 <ipaddr>}
Description
Displays the lldp management address information.
Parameters
Ipv4
−
IP address of IPV4.
Restrictions
None.
