DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
188
disable sntp
Purpose
To disable SNTP server support.
Syntax
disable sntp
Description
This will disable SNTP support. SNTP service must be separately configured (see
config
sntp
).
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable SNTP support:
DES-1228/ME:4#disable sntp
Command: disable sntp
Success.
DES-1228/ME:4#
config time
Purpose
Used to manually configure system time and date settings.
Syntax
config time <date ddmmmyyyy> <time hh:mm:ss>
Description
This will configure the system time and date settings. These will be overridden if SNTP is
configured and enabled.
Parameters
date
– Express the date using two numerical characters for the day of the month, three
alphabetical characters for the name of the month, and four numerical characters for the
year. For example: 03aug2003.
time
– Express the system time using the format hh:mm:ss, that is, two numerical
characters each for the hour using a 24-hour clock, the minute and second. For example:
19:42:30.
Restrictions
Only Administrator-level users can issue this command. Manually configured system time
and date settings are overridden if SNTP support is enabled.
Example usage:
To manually set system time and date settings:
DES-1228/ME:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DES-1228/ME:4#
config time_zone
Purpose
Used to determine the time zone used in order to adjust the system clock.
Syntax
config time_zone {operator [+|-] | hour <gmt_hour 0-13> | min <minute 0-59>}(3)
Description
This will adjust system clock settings according to the time zone. Time zone settings will
adjust SNTP information accordingly.
Parameters
operator
– Choose to add (+) or subtract (-) time to adjust for time zone relative to GMT.
