DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
221
config admin local_enable
command. When a user chooses the “
local_enable
” method to promote user level
privileges to administrator privileges, he or she will be prompted to enter the password
configured here that is set locally on the Switch.
Parameters
<password 15>
−
After entering this command, the user will be prompted to enter the old
password, then a new password in an alphanumeric string of no more than 15 characters,
and finally prompted to enter the new password again for confirmation. See the example
below.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the password for the “local_enable” authentication method.
DES-1228/ME:4#config admin local_enable
Command: config admin local_enable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DES-1228/ME:4#
