DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
22
config greeting _message
described on the Banner Editor:
Quit without save: Ctrl+C
Save and quit: Ctrl+W
Move cursor: Left/Right/Up/Down
Delete line: Ctrl+D
Erase all setting: Ctrl+X
Reload original setting: Ctrl+L
Restrictions
Only Administrator-level users can issue this command. Other restrictions include:
If the “
reset/reset config
” command is executed, the modified banner will remain
modified. However, the “
reset system
” command will reset the modified banner to the
original factory banner.
The capacity of the banner is 6*80. 6 Lines and 80 characters per line.
Ctrl+W will only save the modified banner in the DRAM. Users need to type the “
save
”
command to save it into FLASH.
Only valid in threshold level.
Example usage:
To modify the banner to read “Say goodnight, Gracie”:
DES-1228/ME:4# config greeting_message
Command: config greeting_message
Greeting Messages Editor
================================================================================
DES-1228/ME Metro Ethernet Switch
Command Line Interface
Firmware: Build 1.00.B04
Copyright(C) 2009 D-Link Corporation. All rights reserved.
================================================================================
<Function Key> <Control Key>
Ctrl+C Quit without save left/right/
Ctrl+W Save and quit up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
--------------------------------------------------------------------------------
show greeting_message
Purpose
Used to view the currently configured greeting message configured on the Switch.
Syntax
show greeting_message
Description
This command is used to view the currently configured greeting message on the
Switch.
Parameters
None.
Restrictions
None.
