DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
198
28
MAC
N
OTIFICATION
C
OMMANDS
The MAC notification commands in the Command Line Interface (CLI) are listed, in the following table, along with their
appropriate parameters.
Command
Parameters
enable mac_notification
disable mac_notification
config mac_notification
{interval <int 1-2147483647>|historysize <int 1-500>}(1)
config mac_notification ports
[<portlist> | all] [enable | disable]
show mac_notification
show mac_notification ports
<portlist>
Each command is listed, in detail, in the following sections.
enable mac_notification
Purpose
Used to enable global MAC address table notification on the Switch.
Syntax
enable mac_notification
Description
This command is used to enable MAC address notification without changing configuration.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable MAC notification without changing basic configuration:
DES-1228/ME:4#enable mac_notification
Command: enable mac_notification
Success.
DES-1228/ME:4#
disable mac_notification
Purpose
Used to disable global MAC address table notification on the Switch.
Syntax
disable mac_notification
Description
This command is used to disable MAC address notification without changing configuration.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable MAC notification without changing basic configuration:
DES-1228/ME:4#disable mac_notification
Command: disable mac_notification
Success.
DES-1228/ME:4#
