D-Link DES-1228 - Web Smart Switch Reference Manual Download Page 94

Page: 94 / 306

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual

DES-1228/ME:4#create fdb default 00-00-00-00-01-02 port 5

Command: create fdb default 00-00-00-00-01-02 port 5

Success.

DES-1228/ME:4#

create multicast_fdb

Purpose

Used to create a static entry to the multicast MAC address forwarding table (database)

Syntax

create multicast_fdb <vlan_name 32> <macaddr>

Description

This command will make an entry into the Switch’s multicast MAC address forwarding
database.

Parameters

<vlan_name 32>

−

The name of the VLAN on which the MAC address resides.

<macaddr>

−

The MAC address that will be added to the forwarding table.

Restrictions

Only Administrator-level users can issue this command.

Example usage:

To create multicast MAC forwarding

DES-1228/ME:4#create multicast_fdb default 01-00-00-00-00-01

Command: create multicast_fdb default 01-00-00-00-00-01

Success.

DES-1228/ME:4#

config multicast_fdb

Purpose

Used to configure the Switch’s multicast MAC address forwarding database.

Syntax

config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>

Description

This command configures the multicast MAC address forwarding table.

Parameters

<vlan_name 32>

−

The name of the VLAN on which the MAC address resides.

<macaddr>

−

The MAC address that will be added to the multicast forwarding table.

[add | delete]

−

add

will add ports to the forwarding table.

delete

will remove ports from the

multicast forwarding table.

<portlist>

−

Specifies a port or range of ports to be configured.

Restrictions

Only Administrator-level users can issue this command.

Example usage:

To add multicast MAC forwarding:

DES-1228/ME:4#config multicast_fdb default 01-00-00-00-00-01 add 1-5

Command: config multicast_fdb default 01-00-00-00-00-01 add 1-5

Success.

DES-1228/ME:4#

Summary of Contents for DES-1228 - Web Smart Switch



















































































































































































































































































































Search results

Summary of Contents for DES-1228 - Web Smart Switch

Reviews:

Related manuals for DES-1228 - Web Smart Switch

Brands by name

Popular brands

D-Link DES-1228 - Web Smart Switch, Reference Manual

Search results

Summary of Contents for DES-1228 - Web Smart Switch

Reviews:

Related manuals for DES-1228 - Web Smart Switch

Brands by name

Popular brands