DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
6
DES-1228/ME:4#show
Command: show
Next possible completions:
802.1p 802.1x access_profile account
acct_client address_binding arp_spoofing_prevention
arpentry asymmetric_vlan auth_client auth_diagnostics
auth_session_statistics auth_statistics authen
authen_enable authen_login authen_policy auto_fdb
autoconfig bandwidth_control command command_history
config cos cpu_access_profile
cpu_filter dhcp_local_relay dhcp_relay dscp_mapping
error fdb filter firmware
flood_fdb gratuitous_arp greeting_message gvrp
igmp_snooping ipif iproute lacp_port
link_aggregation lldp log log_save_timing
loopdetect mac_notification mgmt_pkt_priority mirror
multicast multicast_fdb packet port_security
ports pppoe radius router_ports
safeguard_engine scheduling scheduling_mechanism
serial_port session smtp snmp
sntp ssh stp switch
syslog tech_support terminal_line time
traffic traffic_segmentation trusted_host
utilization vlan vlan_trunk
DES-1228/ME:4#
Figure 2-6. Next possible completions: Show Command
In the above example, all of the possible next parameters for the
show
command are displayed. At the next command prompt, the
up arrow was used to re-enter the
show
command, followed by the
account
parameter. The CLI then displays the user accounts
configured on the Switch.
