DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
159
DES-1228/ME:4# config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DES-1228/ME:4#
config 802.1x reauth
Purpose
Used to configure the 802.1X re-authentication feature of the Switch.
Syntax
config 802.1x reauth {port_based ports [<auth_portlist> | all] | mac_based | ports
[<portlist> | all] {mac_address <macaddr>}]
Description
The
config 802.1x reauth
command is used to re-authenticate a previously authenticated
device based on port number.
Parameters
port_based
– This instructs the Switch to re-authorize 802.1X functions based only on the
port number. Ports approved for re-authorization can then be specified.
mac_based
−
This instructs the Switch to re-authorize 802.1X functions based only on the
port number or the MAC address. MAC addresses approved for re-authorization can then
be specified.
ports <auth_portlist>
−
Specifies a port or range of ports to be re-authorized.
all
−
Specifies all of the ports on the Switch.
mac_address <macaddr>
−
Enter the MAC address to be re-authorized.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure 802.1X reauthentication for ports 1-18:
DES-1228/ME:4#config 802.1x reauth port_based ports 1-18
Command: config 802.1x reauth port_based ports 1-18
Success.
DES-1228/ME:4#
config radius add
Purpose
Used to configure the settings the Switch will use to communicate with a RADIUS server.
Syntax
config radius add <server_index 1-3> <server_ip> key <passwd 32> [ default | {
auth_port<udp_port_number 1-65535> | acct_port <udp_port_number 1-65535>}(1)]
Description
The
config radius add
command is used to configure the settings the Switch will use to
communicate with a RADIUS server.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of RADIUS server settings. Up
to 3 groups of RADIUS server settings can be entered on the Switch.
<server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used between the Switch and
the RADIUS server.
<passwd 32>
−
The shared-secret key used by the RADIUS server and the Switch. Up to
32 characters can be used.
default
−
Uses the default UDP port number in both the “auth_port” and “acct_port”
settings.
