DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
50
config snmp system_contact
Purpose
Used to enter the name of a contact person who is responsible for the Switch.
Syntax
config snmp system_contact{<sw_contact>}
Description
The
config snmp system_contact
command is used to enter the name and/or other
information to identify a contact person who is responsible for the Switch. A maximum of
128 characters can be used.
Parameters
<sw_contact>
−
A maximum of 128 characters is allowed. A NULL string is accepted if
there is no contact.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the Switch contact to “
MIS Department II
”:
DES-1228/ME:4#config snmp system_contact MIS Department II
Command: config snmp system_contact MIS Department II
Success.
DES-1228/ME:4#
config snmp system_location
Purpose
Used to enter a description of the location of the Switch.
Syntax
config snmp system_location {<sw_location>}
Description
The
config snmp system_location
command is used to enter a description of the
location of the Switch. A maximum of 128 characters can be used.
Parameters
<sw_location>
−
A maximum of 128 characters is allowed. A NULL string is accepted if
there is no location desired.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the Switch location for “
H Q 5 F
”:
DES-1228/ME:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-1228/ME:4#
config snmp system_name
Purpose
Used to configure the name for the Switch.
Syntax
config snmp system_name {<sw_name>}
Description
The
config snmp system_name
command configures the name of the Switch.
Parameters
<sw_name>
−
A maximum of 128 characters is allowed. A NULL string is accepted if no
name is desired.
Restrictions
Only Administrator-level users can issue this command.
