DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
35
Example usage:
To delete a previously entered SNMP user on the Switch:
DES-1228/ME:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-1228/ME:4#
show snmp user
Purpose
Used to display information about each SNMP username in the SNMP group username
table.
Syntax
show snmp user
Description
The
show snmp user
command displays information about each SNMP username in the
SNMP group username table.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To display the SNMP users currently configured on the Switch:
DES-1228/ME:4#show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
-------- ------------ ------------ ---------------- -----------------
initial initial V3 None None
Total Entries: 1
DES-1228/ME:4#
create snmp view
Purpose
Used to assign views to community strings to limit which MIB objects and SNMP manager
can access.
Syntax
create snmp view <view_name 32> <oid> view_type [included | excluded]
Description
The
create snmp view
command assigns views to community strings to limit which MIB
objects an SNMP manager can access.
Parameters
<view_name 32>
−
An alphanumeric string of up to 32 characters that identifies the SNMP
view that will be created.
<oid>
−
The object ID that identifies an object tree (MIB tree) that will be included or
excluded from access by an SNMP manager.
view type
– Sets the view type to be:
•
included
−
Include this object in the list of objects that an SNMP manager can
access.
•
excluded
−
Exclude this object from the list of objects that an SNMP manager can
access.
Restrictions
Only Administrator-level users can issue this command.
