DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
14
show serial_port
Purpose
Used to display the current serial port settings.
Syntax
show serial_port
Description
This command displays the current serial port settings.
Parameters
None.
Restrictions
None
Example usage:
To display the serial port setting:
DES-1228/ME:4#show serial_port
Command: show serial_port
Baud Rate : 9600
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DES-1228/ME:4#
config serial_port
Purpose
Used to configure the serial port.
Syntax
config serial_port { baud_rate [9600|19200|38400|115200] | auto_logout
[never|2_minutes|5_minutes|10_minutes|15_minutes] }(1)
Description
This command is used to configure the serial port’s baud rate and auto logout settings.
Parameters
baud_rate [9600 | 19200 | 38400 | 115200]
−
The serial bit rate that will be used to communicate
with the management host. There are four options: 9600, 19200, 38400, 115200.
never
−
No time limit on the length of time the console can be open with no user input.
2_minutes
−
The console will log out the current user if there is no user input for 2 minutes.
5_minutes
−
The console will log out the current user if there is no user input for 5 minutes.
10_minutes
−
The console will log out the current user if there is no user input for 10 minutes.
15_minutes
−
The console will log out the current user if there is no user input for 15 minutes.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the baud rate:
DES-1228/ME:4#config serial_port baud_rate 115200
Command: config serial_port baud_rate 115200
Success.
DES-1228/ME:4#
