(A)
(B)
(C)
(F)
(E)
(B)
(D)
RG1, RG2, RG3, RG4
6:2
UGG050-0517
S Series
OPEN / CLOSE
Open the hopper
1. Read page 6:1 “General rules, Open the granulator”.
2. Read page 2:15 “Funnel, Hopper”.
3. Read page 2:17 “Safety switch” and “Star knob”.
4. Unscrew the hopper’s star knob(s).
5. Release the switch key from the safety switch.
6. Open / fold the hopper backwards.
Note! Hold the hopper while opening / closing it, so it
does not fall uncontrolled.
7. The hopper is opened.
Open the cutter housing
1. Read page 2:9 “Cutter housing”.
2. Open the hopper. >Page 6:2.
3. Open / fold up the cutter housing’s upper frame.
Note! Hold the handle while opening / closing the
cutter housing’s upper frame, so it does not fall
uncontrolled.
4. Lock the cutter housing’s upper frame by a piece of
wood. Check that the cutter housing’s upper frame
stays in the upper position.
5. The cutter housing is opened.
6. OPEN / CLOSE
Open the granulator
(A) = Hopper
(B) = Star knob, Hopper
(C) = Switch key, Hopper
(D) = Safety switch, Cutter housing
(E) = Handle, Cutter housing’s upper frame
(F) = Piece of wood, Cutter housing’s upper frame