2:6
UGG050-0517
S Series
(A)
S914
S918-Twin
(B)
(C)
(E)
(D)
(E)
DESCRIPTION
The cutter housing is designed and adapted to the type of
plastic residue that the customer has specified before
order. >Page 9:21-9:24 “Cutter housing”.
The cutter housing’s upper frame can be opened to
facilitate cleaning and maintenance.
>Page 6:2 “Open the cutter housing”.
Note! When the cutter housing’s upper frame is opened, it
must be manually locked by a piece of wood.
A granulator with additional suffix “Twin” is provided
with a doubled cutter housing.
>Page 2:8 “Additional suffix Twin”.
Sealings
There is one sealing in each short block of the cutter
housing. The left sealing is a left-hand threaded and the
right sealing is right-hand threaded. The reversed thread
deflects fed material and prevent it from penetrating the
bearings.
The sealings must be regularly checked and replaced as
necessary. >Page 9:25 “Rotor”.
Note! The left and the right sealing must not be mixed up.
If the left and the right sealing are mixed up, the granula-
tor might get seriously damaged during operation, due to
the material leaking into the bearings.
Cutter housing
2. DESCRIPTION
(A) = Cutter housing, S918-Twin
(B) = Cutter housing, S914
(C) = Cutter housing’s upper frame
(D) = Piece of wood
(E) = Sealing