![background image](http://html.mh-extra.com/html/conair/s-series/s-series_user-manual_2649432034.webp)
2:24
UGG050-0517
S Series
(A)
(B)
Advanced
B I N
F U L L
(C)
Extended
(C)
DESCRIPTION
2. DESCRIPTION
General rules, Level switch
The granule bin can be provided with a level switch.
Level switch is optional. The level switch monitors the
granulate level in the granule bin. As the granulate level
gets too high, the level switch takes one or several of the
below listed actions:
• Stops the granulator.
• Stops optional feed equipment.
• Shows a fault message on the display on the electrical
cabinet.
• Lights up a warning lamp (option).
• Starts up a siren (option).
• Resets the level switch and restarts the granulator and/
or the feed equipment as the granulate level in the
granule bin has sunk.
The electrical circuit diagram specifies the actual function
of the level switch in the supplied machine.
Note! Level switch is only optional on granulator with
electrical cabinet “Extended” or “Advanced”. >Page 2:18
“Electrical cabinet, Operating panel”.
Level switch, Capacitive type
A level switch of capacitive type, is provided with a
sensor that senses non electrically conductive material. If
the granulate level gets too high, the sensor activates the
level switch.
The capacitive level switch’s sensitivity can be adjusted
from 2 to 16 mm. On delivery the capacitive level
switch’s sensitivity is set to 16 mm.
>Page 7:7 “Adjust the level switch”.
Level switch, Paddle type
A level switch of paddle type is provided with rotating
paddles. When the granulator is started the paddles starts
rotating. If the granulate level gets too high, the paddles
will stop rotating. As the paddles stands still, the level
switch is activated.
The sensitivity has 3 positions, high, medium and low.
>Page 7:7 “Adjust the level switch”.
Level switch, Granule bin
(A) = Level switch, Capacitive type
(B) = Level switch, Paddle type
(C) = To much granulate in granule bin